5
Assembly Instructions
1.
Remove Cove-2424-Base from Packaging crate
Remove side panels from crate using a power drill with
Philips head bit.
Three People are required to lift base out of packaging
and place into final location. CAUTION: Base is heavy,
take all necessary precautions to prevent injury during
installation.
2.
Sparker Box Installation
Locate sparker inside of crystal fire burner box.
Remove sparker cap and hex nut. Insert AAA battery
(not included) with + end out.
Install sparker into control panel as shown below,
secure using hex nut and replace sparker cap.
Depress sparker button to ensure your sparker is
working properly. You should hear the spark behind the
sparker box.
Remove
