7
Attach flex line from the burner to gas valve as shown.
Use two wrenches to secure connection.
Drop burner
into place in base.
4.
Connect Ground wire and Electrode wire from
burner to sparker box.
Plug both
BLACK
wires hanging from the burner into
the back of the sparker box. If an orange wire is
present, do not use it. The orange wire is for Direct
Spark Ignition system only.
Test system by pushing the button on the
igniter. Consult the troubleshooting
section of the Crystal Fire Burner Owner’s
Manual, if the spark is weak, intermittent,
or not present.
