8 |
P a g e
Igniter Installation
Style 1: Single Prong Igniter
Your Crystal Fire ™ burner includes one of two styles of igniter. These
can be distinguished by the number of wire connection prongs on the
back (glossy) side. If one prong is present see below, otherwise turn to
page 10 for instructions on how to install and use a two-pronged igniter.
Step 2:
Disassemble igniter by
unscrewing button cap, followed by
plastic nut
Step 3:
place looped end of
grounding wire onto your igniter. As
shown
Step 1:
Make sure the valve is in
the OFF position
