5 |
P a g e
6.
With top securely
fastened to base, set granite
sections into place, polished
side up.
4.
With top centered on
base and one hole
approximately centered on
each corner of the base,
insert a mounting clip into
mounting hole
(refer to image at right.)
5.
Insert one of the
included screws through the
hole in the mounting clip
and screw into the table
base. Do not over-tighten as
this may cause stripping.
If stripping occurs, rotate
the top approximately 1”
and re-insert all screws.
Unused screw
hole
For gas hookup instructions, turn to page 7
