6 |
P a g e
Colonial Table Setup
1.
Remove all components from packaging and
inspect for damage or missing parts.
2.
Place the fiberglass table base in your desired
location on flat, level ground.
3.
Viewing the base from above, place a riser piece
on each corner of the base as shown below
.
3a
.
Insert a screw into each
riser to attach to the table
base.
DO NOT OVERTIGHTEN
This may cause stripping. If
stripping occurs, remove
screw and move the riser at
least ½” in any direction
before putting the screw back
in.
4. With help from another person, gently set concrete
top onto the base and center it. If the top doesn’t sit
flat, rotate it until it sits evenly. For a more permanent
installation, an outdoor-rated construction adhesive or
silicone can be used to attach the top to the base.
5. Gently lower your crystal fire burner into the burner
cutout and continue to the next page for gas hookup
and igniter hookup instructions.
