Step 2) Charging the Battery:
Charge the unit for at least 4 hours before first use. The length of time for a fully charged battery will last depending on the
actual usage. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good
battery condition.
2.1)
Plug your USB PC link cable to your PC
2.2)
Align the charging clip with the contacts on the back of the Bike GPS computer.
2.3)
Connect the charging clip securely to the Bike GPS computer.
Note: Please thoroughly dry the charging contacts and surrounding area to ensure proper electrical contact and prevent
corrosion.
When the battery is low, it is time to charge the Bike GPS computer.
Battery low condition:
You cannot turn ON the GPS when the battery is low. The Bike GPS computer will display LOW BATT. You need to recharge
the battery in order to use the GPS again.
When the battery is almost low and you still perform your exercise, your data may not be saved. Please make sure the
battery have enough battery power before doing your exercise in order not to lose your data.
Step 3) Main modes operation
3.1) Press S7 to change modes. The bike computer will show the Mode name for 1.5 seconds before entering the mode itself.
Step 4) Configure your Bike GPS computer:
Before using your Bike GPS computer, please set your Bike computer.
4.1) Go to SET mode and set the following parameters: AUTO LAP, TIME, UNIT, USER, NIGHT, Contrast, CHIME, ALARM,
ODO, and VIEW.
