Note:
•
When CHRONO is stopped or save, after 10 minutes the Bike computer will auto return to Time view. GPS will
be on standby for 1 hour. GPS ring icon blinks during this time. After 1 hour, the GPS will be turned OFF and
the GPS ring icon is also OFF
.
•
Step 7) Download your data to PC:
The Bike Computer comes with PC software to make communication between your Bike Computer and PC easy and
enjoyable. Please install the PC software to your PC using the installer provided. The Bike Computer is using a USB PC link
cable to connect the Bike Computer to PC. Run the GPS PC software on your PC. Plug the USB cable with the Bike
Computer clamped in the other end of the cable. PC software will then prompt you to download the data. Click the download
button to begin downloading. The PC software will prompt to delete the data in the Bike Computer. User has the option to
delete the data in the Bike Computer or not. The PC software installation and instruction guide can be found at the end of this
manual. Please take time to read the guide.
EL backlight:
This Bike Computer has a Night mode function. Following are the options in SET mode and their functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds. (Default)
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when CHRONO is running from 5:00 pm to 7:00 am by default. However, Start (ON)
time and END (OFF) Time for the NIGHT function can be changed in Set mode.
TIME mode
•
How to change views in TIME mode:
DATA mode
•
How to enter the DATA mode:
