14
Model No. 084-6693-4
TM
• Repeat the same at the rest of the T-joint with Spring Mechanism, as
shown below.
• After completing the assembly, the Trampoline Frame and Mat should look
like the illustration below.
Note:
• The even distribution of tension is a critical factor in the proper
assembly of the Trampoline Mat.
• If the Springs (11) can only be inserted with the use of extensive
force, they are not inserted in the correct order and manner.
• Make sure that the Springs (11) are always inserted at an angle
of approximately 90° to the holes on the Top Rail Frame.
ASSEMBLY
084-6693.indd 14
12/5/2014 1:06:41 PM
