15
2.
Mount the wheel angle sensor (continued).
e.
With all hardware
WH
loose, slowly turn the
machine full left lock then full right lock. Check
that the linkage moves freely without binding and
adjust the linkage as necessary (Figures 2e-i and
2e-ii. Note, you will connect the wheel angle sensor
cable later.)
Figure 2e-i: Full left lock
f.
When the linkage does move freely and without
binding, tighten hardware
WH
on the rod and the
swivels (Figure 2e-ii).
Figure 2e-ii: Full right lock
WH