OutBack Power SmartRE 2500, Installation Manual

Page: 27 / 70

Installation
900-0033-01-00 Rev A
25
CAUTION: Equipment Damage
The chassis mounting bracket is not designed to support the weight of the
battery enclosure. Its purpose is to secure the unit to the wall for stability only.
Figure 13 Interlocking Enclosures onto Wall Brackets
Lift the battery enclosure
high enough to clear the
lip of the lower wall-
mounting bracket.
1
Lower the enclosure
into place so that the
Chassis Bracket slides
behind the wall-bracket
and secures the
enclosure in place.
2
Lift the 2
nd
enclosure high
enough to clear the
lip of the upper
wall-mounting
bracket and to slide
the lower bracket
behind the battery
enclosure.
Lower the electronics
enclosure into place so
that the upper Chassis
Bracket slides behind the
wall-bracket and the lower
bracket slides behind the
battery enclosure.
The electronics enclosure
will sit on top of the
battery enclosure.
4
3