OutBack Power SmartRE 2500, Installation Manual

Page: 14 / 70

Introduction
12
900-0033-01-00 Rev A
Components
A complete SmartRE is comprised of the following components depending on the model selected.
Components can be purchased as complete systems or individually.
Table 2 Basic Components of a SmartRE System
Quantity Provided with….
Component
SRE-2500-120-NA, SRE-2500-
120/240-NA, SRE-3000-120-NA,
SRE-3000-120/240-NA
SRE-5000-120/240-NA,
SRE-6000-120/240-NA
Electronics Enclosure 1 2
Battery Enclosure 1 2
Front Cover, Top Cap, and Front Cover Bracket 1 2 each 4 each
Chassis Mounting Brackets (top and bottom) 2 each 4 each
Wall-Mounting Bracket (for 16” wall studs) 2 each 4 each
MATE2 System Control and Display 1 1
SmartRE Installation Manual (not shown) 1 1
SmartRE Operator’s Manual (not shown) 1 1
Figure 2 Basic Components of a SmartRE System
Accessories
The following accessories are available for purchase.
¾
Wall-Mounting Bracket (for 24” wall studs)
¾
Battery Installation kit(s) - provides cabling for specific battery types
¾
Battery Enclosure Paralleling kit(s) – provides the hardware to connect two battery enclosures in parallel.
1
Installation of these components are required for the 3R Rating. May be purchased separately as an accessory.
The Front Cover
Locking Bracket and
the Front Cover have
a 0.45” (1.1 cm) hole
to accommodate a
0.45” (1.1 cm)
standard lock. Locks
can be purchased
from any reputable
locksmith or
hardware store.