Disassembly
14
900-0054-01-00 Rev
A
Separating the Heat Sink from the Power Board
Place the charge controller upside down and remove the seven screws circled in white in Figure 13, on
the left. Do not remove the four cradle screws and washers identified with the X symbol in Figure 13 on
the right.
Figure 13 Bottom/Cradle Screw Removal
Figure 14 Removing Remaining Screws
Continued on next page.
Do NOT Remove the screws
identified here with an “X”.
2. Remove the last three (3)
remaining screws, circled
in white in Figure 14
.
