13
CLEANING AND MAINTENANCE,
Рiс. F
• Unplug the device.
• Wash the inner parts of the device with a soft cloth and
clean water with a detergent, then wipe everything with
a cloth and clean water and wipe dry.
• Contamination of the door gasket can cause damage
to it, so regularly clean it with a soft cloth and a small
amount of neutral detergent.
• Outer surface of the device must be cleaned with a
slightly damp or dry cloth.
• Do not rub with detergent the informational sticker in-
side the device, because printed information can be
erased. The information is necessary for service.
• Do not spill water on the electrical components of
the device, as well as air vents because of the dan-
ger of electric shock.
TRANSPORTATION
, Рiс. E
• Make sure there are no children or animals in the
device.
• Move and transport the device only in the un-
loaded condition.
• It is recommended to move and place the device
in two, Pic. E-1
• Pack the device before moving it.
• When moving do not grab or pull the door or door’s
handle.
• When moving the device you cannot tilt it more than on
45 degrees. Protect the device from excessive vibration
and hits. Pic. E-2.
• Please transport the device packed and in vertical po-
sition. Improper transportation may result in injury and
damage of the device.
POSSIBLE PROBLEMS AND SOLUTIONS
Possible problems
Possible causes
Solutions
Device isn’t working.
• There is no voltage in the mains.
• The cord is plugged incorrectly.
• Turn on the device.
• Check the main and the plug. If they are
working, call the service center.
Vibrating noise .
The device is in unstable position.
• Adjust the position of the device.
• Move it if necessary.
The temperature is not cold
enough
• The door is not closed firmly.
• Not enough ventilation
• Make sure the door is firmly closed.
• Clean the vents.
The interior lighting is not
working.
• The device is not turned on.
• Burnt-out bulb.
• Turn on the device.
• Replace the bulb.
The compressor is operating for
a long period.
• Ambient temperature is too high.
• The door is opened too often or
remains open.
• Adjust the temperature of the room.
• Make sure the door is firmly closed.
Water flows from the bottom of
the device.
The hole for water draining is
clogged
Carefully clean the hole.
Frost accumulated on the rear
side of the device.
• There is hot or moisture food in
the device.
• High humidity of the
environment.
• Do not place hot or unpacked products into the
device.
• Adjust the humidity in the room.
Please check the possible problems before contacting a service center.
Specifications
Model
RF1005
Refrigerant
R600a
Refrigerant weight
25 g
Reversible doors
Yes
Total capacity, L
103
Refrigerating chamber capacity
97
Power consumption class
А+
Power consumption, kW•h/year, W•h/day
110 kW, 300 W
Climatic class
N/SN/ST
Level of noise
less than 42 dB
Temperature adjustment
from 0°C to +10°C
Rated voltage
220-240 V~, 50 Hz
Storage and transportation temperature
-25°C tо +35°C
Operating temperature from
+5°C tо +35°C
Humidity Requirements
15-75% without condensate
Class of protection
I
Dimensions HxWxL, mm
835х486х536
Weight, kg
23,5
* Products must be stored in dry, ventilated warehouses at a temperature not lower than -25°С.
Summary of Contents for RF1005
