6
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
sEttiNG,
Рiс. A-2
• Place the device on a flat horizontal heat resistant
surface, high from children’s reach, keeping the dis-
tance from walls/furniture as shown in the picture
A-2. One side must be completely free.
it is forbid-
den to embed this device.
•
Do not place the working device under/near cur-
tains or other flammable materials, as this may
cause a fire.
PROdUct sEt,
Рiс. В
Body. ........................................................................ 1 pc.
1
Enameled pan ..................................................... 1 pc.
2
Grid ..................................................................... 1 pc.
Instructions manual ................................................. 1 pc.
Warranty card .......................................................... 1 pc.
ELEMENts OF dEsiGN,
Рiс. С-1
1
Door handle
2
Slots for grid and pans
3
Door
4
Control panel
5
Ventilation openings
6
Operation indicator
Inner backlight, Pic. C-1-2
UtiLiZatiON
Control panel,
Рiс. С-2
Temperature regulator
•
Adjusting the temperature from 100°C to
240°C
Р
Preparation mode switch
•
stOP
position
•
Upper heating element (upper heating)
•
Lower heating element (lower heating)
•
Upper and lower heating elements, simultaneous
operation of both upper and lower heating
elements
Timer
•
Timer, time selection from 0 up to 90 minutes.
•
stOP
position, utilized for stopping the cooking
process.
Preparation for operation
Before first use,
wipe the body with a soft, dry cloth.
Wash the other parts with warm water and detergent.
Before assembling or disassembling the make sure that
the device is unplugged. Thoroughly dry all parts.
Turn on the empty device for 15 minutes, set the max
-
imum temperature in , to remove the smell of a new
device. Ventilate the room. Allow the device to cool.
Order of operation,
Рiс.C-2
1. Make sure that timer knob
is set in the . posi-
tion. Plug in the device.
2. Set the required temperature with the regulator.
3. Turn on the timer for 5 minutes in the , for the
device to heat up. Timer knob will turn automatically
in the cooking process.
4. Choose a required mode with the help of correspond-
ed regulators:
5. Place prepared beforehand products on the pan/grid.
Do not place products closer than 2 cm. from the
heating elements.
6. Carefully install grid, pan into the device, Pic. C-3.
Close the door.
7. Turn on the timer , setting the required time. It
isn’t recommended to open the door in the prepara-
tion process.
NOtE:
When the device is working, the inner backlight
and operation indicator
6
, Рiс. С-1.
8. When the preparation process is completed, the tim-
er (device) turns off automatically, you will hear a
sound signal. Set all the regulators into the posi-
tion.
9. Carefully open the door and take out prepared prod-
uct with the help of potholders or a special handle for
pan, Pic. C-4.
Summary of Contents for MO2004
