16
OPERAtIOn
OPERATION
REVERSE
AUTOMATIC ENGINE PROTECTION
Make sure that the meat grinder is assembled in one of the selected sets:
•
Preparing mince
•
Preparing sausages
•
Preparing meatballs
•
Cutting vegetables
Before assembling or disassembling the attachments, make sure that the device is unplugged.
use the remove the cutting block button to assemble attachments.
1.
Plug the device.
2.
Power the device by pressing the
POWER
button.
3.
Place a container under the cutting block, so that the grind products fall in it.
4.
Start the engine by pressing
START/STOP
button.
5.
Cut meat or vegetables in pieces that easily slip into the filling neck. Place the products onto the
filling tray, and carefully put them into the meat grinder with the help of pusher, not applying force.
6.
to finish the operation, press
START/STOP
button.
7.
unplug the device.
8.
After that you can disassemble the device and begin cleaning. to remove the cutting block, press
and hold the corresponding button and turn the block clockwise.
If something got stuck in the meat grinder, turn it off by pressing
START/STOP
button. Press and
hold
REVERSE
button, so that the cutting screw begin to rotate into the opposite direction, pushing
the stuck product out.
Automatic protection works to protect the engine from overheating and to avoid breakage. In case when
automatic protection turned on, press the
UNLOCK
button for meat grinder to work properly again.
NOTE!
In case when REVERSE button did not help, you must unplug the device,
disassemble it and clean it by yourself.
Summary of Contents for MG1310/DC
