UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with carrier.
Do not use the OEMTOOLS
™
Angle Grinder if broken,
bent, cracked or damaged parts (including labels) are
noted. Any Angle Grinder that appears damaged in any
way, operates abnormally or is missing parts should be
removed from service immediately. If you suspect that the
Angle Grinder was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Angle Grinder under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone
who uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual
24663
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
4-1/2" ANGLE GRINDER
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. This tool is designed for certain applications only. OEMTOOLS
™
cannot be responsible for
issues arising from modification. We strongly recommend this tool is not modified and/or used for any application other
than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the tool until
you have first contacted customer service to determine if it can or should be performed on the product.
Explantion of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
NOTES
:
Provide clarity and helpful information.
WARNING
1
4/18
2018 OEMTOOLS
™
