14
OPERAtIOn
FOR MEAtBALLS
1.
Insert the screw into the cutting block.
2.
Place the separator onto the screw
3.
Place the locking attachment onto the separator. tighten the assembled cutting block with the
locking ring by turning it clockwise.
4.
Insert the cutting block into the meat grinder, turn it counterclockwise and secure it until you hear
a click.
5.
Attach the filling tray to the cutting block.
6.
Place the pusher into the filling block’s opening.
TIP!
If necessary, you may place instead of the separator the blade and a necessary
perforated disk. At the same time, the filling ingredient will not be mince but whole
pieces of meat.
Summary of Contents for MG1310/DC
