Oursson MD2041, Instruction Manual

Page: 11 / 24

11
handling of the product and compliance with the rules
of operation the actual life may exceed the lifetime set
by manufacturer.
2. At the end of the product lifetime, you should contact
an authorized service center for to conduct a preven-
tive maintenance of the product and determine the
suitabilityfor further use. Work on conducting a pre-
ventive maintenance of the products is also made in
service centers on paid basis.
3. The manufacturer does not recommend the use of this
product after the end of its lifetime without its preven-
tive maintenance by the authorized service center,
since inthis case, the product can be dangerous to the
life, health or property of the consumer.
Product Recycling and Disposal
This appliance has been identified in accordance with the
European directive 2002/96/EG on Waste Electrical and
Electronic Equipment – WEEE.
After the expiration of the lifetime, the product cannot be
disposed with another household waste. Instead, it shall be
deposited in the appropriate recycling collection point for
electrical and electronic equipment for proper treatment and
disposal in accordance with federal or local law. By dispos-
ing correctly this product, you will help to conserve natural
resources and preventing the product from damag-
ing the environment and human health. For more
information on the collection point and recycling of
this product, please contact your local municipal
authorities or the enterprise for household waste
disposal.
To avoid misunderstandings, we highly
recommend you to read carefully the in-
struction manual and the warranty obliga-
tions. Check the correctness of the war-
ranty card. Warranty card is valid only if the
following are correctly and clearly stated:
model, serial number, date of purchase,
clear stamps, buyer’s signature. The se-
rial number and the model of the device
must be the same as in the warranty card.
If these conditions are not fulfilled or the
data specified in the warranty card was
changed, the warranty card is invalid.
Date of manufacture
Each product has a unique serial number in the form of
alphanumeric row and is duplicated with a barcode that
contains the following information: name of the product
group, date of manufacture, serial number of the product.
Serial number is located on the rear of the product, on the
package and the warranty card.
The first two letters-correspondence to the product
group (microwaves – MM/MD).
The first two digits – year of manufacture.
The second two digits – month of manufacture.
The last two digits – serial number of product.
Made in China
If you have questions or problems with OURSSON products – please contact us by e-mail:
support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions,
including copying, printing and distribution, but not limited to, involves the application of the guilty person to
civil liability and criminal liability.
Contact information:
1. Manufacturer of goods - Guangdong Galanz Microwave Electrical Appliances Manufacturing Co., Ltd, NO.3,
XINGPU AVENUE, HUANGPU TOWN, ZHONGSHAN CITY, GUANGDONG PROVINCE, CHINA.
2. Certification information product available on the website www.oursson.com.