Oursson IP2310T, User Manual

Page: 16 / 20

TROUBLESHOOTING
16
Problem/
Codes on the
display Message Solution/What you should do
The power-on light does
not go on. There is a connection problem.
•
Check if the induction cooker is connected to the
mains and if the plug is inserted firmly into the wall
socket.
• Check if the power cord have no damaged.
The power on lights on
the panel goes on, but
the induction plate don’t
heating. • Check if the using cookware are suitable for induction
plates.
• Check if the bottom size no less then 12cm.
• Take the appliance to your Oursson dealer or a
service centre authorised by Oursson.
The induction plate stops
heating during cooking
mode. • Check if the air outlet do not cover while the induction
cooker is operating.
• Check if the cooking timer is finished countdown.
• Automatic protection system of induction plate switch
on. Disconnect the power cord from the wall socket.
Wait a few minutes, connect the power cord into the
wall socket, touch
button.
• Take the appliance to your Oursson dealer or a
service centre authorised by Oursson.
If your induction cooker does not function properly or if the cooking quality is insufficient, consult the
table below. If you are unable to solve the problem, contact a Oursson service centre or the Customer
Care Centre in your country.