Oursson IP2310T, User Manual

Page: 12 / 20

GENERAL DESCRIPTION
12
You can simply operate the appliance manually
You can simply operate the appliance manually
• Put the mains plug in the wall socket, the appliance produce a 2-second beep. «L» shows and blink on
the display. The induction plate goes to the stand-by mode.
• Touch the button to switch ON the induction plate, display shows «– – – –» .
Tip: The induction plate automatically switch to the stand-by mode if you don’t touch any key after less
1 minute. The appliance produce a 2-second beep.
•
Place the cookware on the cooking zone
• Touch the and to set the heating power level.
• Choose the one of diffrents modes for each cooking zone:
For left zone REHEAT, STEW, SOUP, BOIL
For right zone
DEEP FRYING, FRYING, BOIL
• After setting heating power level the induction plate start to heat automatically.
• Touch the button to switch
OFF
the induction plate after you finish cooking. The induction plates
switch to the stand-by mode. After less 1 minute the cooling fan will switch off.
Tip: If no any cookware on the induction plate in a cooking mode, the induction plate don’t heating and
produce 1-second beep. After 1 minute the induction plate automatically switch in to stand-by mode.
USING THE DIFFERENT MODES
THE POWER HEARTING LEVEL ADJUSTMENT
PREHEAT MODE
Note: Any time you touch the buttons the induction plate produce 1-second beep signal.
In stand-by mode touch this button to use PREHEAT mode. The display shows the heating power
level 120 Watt and cooking time «2:00» hours, by rotaiton of each value.These values are set by default. Your
induction plate is in preheat mode. You may stop
PREHEAT mode also by touch button.
• Touch the and buttons to set the power level. During you touch buttons, the power heating
lights goes on by rotation.
• Touch the or buttons, then use the slider by touching from left to right and back to set
and adjust the heating power level. The power heating lights goes on by rotation.