Oursson BL0640G, Instruction Manual

Page: 3 / 18

3
meant for repair of products under the trade-
mark OURSSON.
• When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
• In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
• Be particularly careful and cautious when
using the device near children.
• Do not touch any moving parts, as this may
cause injury.
• The power cord is specially made relatively
short in order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
• Do not connect this device to a grid which is
overloaded with other appliances: it can lead
to the fact that the device will not function
properly.
• Do not install the device near gas and electric
stoves and ovens.
SAFETY INSTRUCTIONS
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the instructions.
When using electrical appliances should take
the following precautions:
• Use the device according to the following
instructions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the
product set.
• To protect against risk of electrical shock do
not put the cord in water or other liquid. If
for some reason the water got into the unit,
contact an authorized service center (ASC)
OURSSON AG.
• For power supply, use a power grid with proper
characteristics.
• Do not use the device in areas where the air
can contain vapors of flammable substances.
• Never attempt to open the device by your-
self – it could possibly be the reason of an
electrical shock can lead to product mal-
function and will invalidate the manufactur-
er’s warranty. For repair and maintenance,
contact only authorized service centers
220-240 В