Oursson BL0640G, Instruction Manual

Page: 15 / 18

15
Using the product when after the terms of use
(lifetime):
1. Lifetime set by OURSSON AG for this product
applies only when the product is used
exclusively for personal, family or household
needs, as well as the consumer observes the
correct operation, storage and transportation
of products. Under the condition of careful
handling of the product and compliance with the
rules of operation the actual life may exceed the
lifetime set by OURSSON AG.
2. At the end of the product lifetime, you should
contact an authorized service center for to
conduct a preventive maintenance of the product
and determine the suitability for further use.
Work on conducting a preventive maintenance
of the products is also made in service centers
on paid basis.
3.
OURSSON AG does not recommend the use of
this product after the end of its lifetime without
its preventive maintenance by the authorized
service center, since in this case, the product
can be dangerous to the life, health or property
of the consumer.
Product Recycling and Disposal
After the expiration of the lifetime, the product
cannot be disposed with another household
waste. Instead, it shall be deposited in the
appropriate recycling collection point for electrical
and electronic equipment for proper treatment
and disposal in accordance with federal or local
law. By disposing correctly this product, you will
help to conserve natural resources and preventing
the product from damaging the environment
and human health. For more information on the
collection point and recycling of this product,
please contact your local municipal authorities or
the enterprise for household
waste disposal.
Date of manufacture
Each product has a unique serial number in the
form of alphanumeric row and is duplicated with
a barcode that contains the following information:
name of the product group, date of manufacture,
serial number of the product.
Serial number is located on the rear of the product,
on the package and the warranty card.
1 The first two letters-correspondence to the
product group (blender - BL).
2 The first two digits – year of manufacture.
3 The second two digits – week of manufacture.
4 The last two digits – serial number of product.
Note!
To avoid misunderstandings, we highly recommend you to read carefully the instruction
manual and the warranty obligations. Check the correctness of the warranty card. Warranty card is
valid only if the following are correctly and clearly stated: model, serial number, date of purchase,
clear stamps, buyer’s signature. The serial number and the model of the device must be the same
as in the warranty card. If these conditions are not fulfilled or the data specified in the warranty card
was changed, the warranty card is invalid.
EG1225011234567
1 2 3 4