Last Update: 2011-June INSTRUCTION MANUAL FOR THERMOSYPHONIC SYSTEMS
28/35
©TANSUG MAKİNA LTD. 2008
6.3
On the side of your electrical element, there is a screw that goes through
the body of the element. The third hose is reserved for grounding. Connect this hose to the
screw attached to the body of the electrical element. Make sure that your home’s electrical
circuit has grounding.
6.4
The electrical heater comes with a built-in thermostat. The adjustment interval for
the thermostat is 0–80°C. Before installation the thermostat should be adjusted to the requested
temperature. Remember that setting a high
temperature on the thermostat can mean the
use of your electrical heater for longer time,
thereby consuming high levels of electricity.
It
is recommended that a thermostat
temperature setting of minimum 45° C is set
on your electrical element. This is
important to avoid proliferation of the
Legionella bacteria. Additionally, remember
that most people can not shower under more than 45º C.
6.5 The following photos illustrate the installation of electrical heater.
Insert the power
cable through the
cable gate of the
heater service cap.
WARNING
ALL INSTALLATION OF ELECTRICAL DEVICES MUST BE CARRIED
ONLY BY AN AUTHROZIED ELECTRICIAN ACCORDING TO THE
INTERNATIONAL AND NATIONAL REGULATIONS.
