Last Update: 2011-June INSTRUCTION MANUAL FOR THERMOSYPHONIC SYSTEMS
23/35
©TANSUG MAKİNA LTD. 2008
for systems 121-151-191 when connecting the back diagonals. Use the
holes on the vertical frames (B) that correspond to this distance between the two legs.
(See Figure A)
6.5.4
The distance between the two legs must be
1260 mm.
for structure type TIR45-2 for
systems 192-302.
6.5.5
Install the aluminum panel frames on the base frames (A). First the top aluminum frame
(D) as illustrated at Figure E. Then put the bottom aluminum panel frame (D) on the
corresponding hole as shown in the Figure. It is crucial that you measure exactly 1950
mm. between the top and bottom aluminum frames. This is the distance required for
accurate placement of the solar panels.
6.5.6
Screw the tank wind belt (G) on the tank beds (F) from the front. Screw the belts from the
back of the stand only after you have placed the tank on the tank beds, after when you
have finished all steps of the installation of the structure.
FIGURE D: TIR-1 OR TIR-2: T. Syphonic Inclined Roof Structure for 1 or 2 Panel(s)
