Otto Bock ParaGolfer Instructions For Use Manual Download Page 7

Page: 7 / 78

Ottobock | 7

Safety instructions

ParaGolfer

1.4 Technical service

INFORMATION

Service and repairs on the sports wheelchair must be car-

ried out exclusively by experts at specialist dealers who

have been authorised and trained by Ottobock. Should

any problems arise, please contact your sports wheel-

chair supplier.

Should you have any questions or a problem that cannot be

resolved despite using the instructions for use, please con-

tact Ottobock Customer Service (see back side of cover for

address).
Ottobock endeavours to support their customers in all re-

spects in order to keep them satisfied with their product for

a long time.

Safety instructions

2.1 Explanation of symbols

WARNING

Warnings regarding possible risks of severe accident or

injury.

CAUTION

Warnings regarding possible risks of accident or injury.

NOTICE

Warnings regarding possible technical damage.

INFORMATION

Information regarding operation. Information for the user and for

service personnel.

Summary of Contents for ParaGolfer















































































Search results

Summary of Contents for ParaGolfer

Reviews:

Brands by name

Popular brands

Otto Bock ParaGolfer, Instructions For Use Manual

Search results

Summary of Contents for ParaGolfer

Reviews:

Brands by name

Popular brands