background image

Ottobock  |  5 

General information

ParaGolfer

General information

INFORMATION

Date of the last update: 2016-09-21

 

„

Please read this document carefully before using the 

product.

 

„

Follow the safety instructions to avoid injuries and dam-

age to the product.

 

„

Have yourself instructed by qualified personnel in the 

proper and safe use of the product.

 

„

Please keep this document in a safe place.

INFORMATION

 

„

New information regarding product safety and product 

recalls can be obtained from the Customer Care 

Center (CCC) at [email protected] or from the manu-

facturer‘s service department (see inside back cover or 

back page for addresses).

 

„

You can request this document as a PDF file from the 

Customer Care Center (CCC) at oa@ottobock. com 

or from the manufacturer‘s service department (see in-

side back cover or back page for addresses). It is pos-

sible to increase the display size of the PDF document.

 

„

For further questions about the instructions for use, 

please contact the authorised personnel who issued 

the product to you.

1.1  Preface

These instructions for use provide the user as well as his or 

her attendants with all the required knowledge on the de-

sign, function, operation and maintenance of the ParaGolfer 

sports wheelchair from Ottobock. The instructions contain 

all the information that is needed to use the sports wheel-

chair safely, to determine the possible causes of a malfunc-

tion and to help eliminate it.
Knowledge of these instructions for use is absolutely neces-

sary to ensure safe use of the sports wheelchair. Therefore, 

the user and his or her attendants must read the instructions 

for use thoroughly, especially the section "Safety Instru-

cions”, before using the sports wheelchair. This ensures the 

functionality of the sports wheelchair is fully utilised.

Summary of Contents for ParaGolfer















































































Reviews: