10
Adjustments and adaptation options
The commonly used clamping levers can be slightly pulled away from the screw and be moved off-load; this way
they can be turned into a more convenient operating position.
Adjusting the angle of the
Locking pin with ”quick release” (1/B)
abdominal leaning support
Foot-operated actuating lever for gas strut (1/C)
Caution: For angle adjustments hold patient and appliance firmly, depress foot-operated actuator, set
appliance to desired angle and release actuator. After each adjustment, secure the foot-operated actuator
with the locking pin to prevent accidental actuation.
Adjusting the length of the body support
Chest pad I (2/F)
by sliding the chest pads
Chest pad II (2/G), (4/A)
Spreading the legs
Release lever (2/C), (5/A)
Locking lever (5/B)
Caution: For angle adjustments hold patient and appliance firmly, pull locking lever and press release
lever, manually set the lever arm (5/C) to desired angle and let go of the release lever.
Back belt
Hook-and-loop fastener (4/C)
Height adjustment (4/B)
Caution: Always secure the patient first with the back belt.
Caution - Danger of injury:
During tilting and pivoting keep hands away from any parts other than those described, particularly from
the folding mechanisms.
Knee pads
Depth adjustment (6/B)
Height adjustment (6/C)
Angle adjustment (6/B)
Width adjustment (6/A)
Hook-and-loop strap fastener (6/D)
Footrests
Depth adjustment (7/B)
Height adjustment (7/A)
Universal angle adjustment (7/C)
Posterior pad
Installation and removal (1/E)
Height adjustment (1/D)
Wheel-lock system
Foot operation (1/F)
Caution: To guarantee the stability of the appliance, always ensure that all four wheel locks are closed.
Accessories
Trained technicians must install any accessories that were not installed by the manufacturer.
Hip pads
Hip pads can be installed at two heights
Height adjustment and/or angle adjustment (2/E) + (2/D)
Width adjustment (2/E)
Thorax pads
The thorax pads can be installed either at chest pad I ( see figure 2 ) or at chest pad II.
Height adjustment by sliding the chest pad (2/F)
Width adjustment (2/A)
Table / Table with basin cut-out
Height adjustment (2/H)
Angle adjustment (1/A)
Depth adjustment (2/B)
