1
b) front direction indicator
Steps:
Slightly press into the notch on top of the housing until the nose jumps out.
Fold down the cover.
Turn the bulb a quarter turn counter-clockwise and remove it.
Properly reassemble all components upon termination of the work.
INfORMATION
When installing the lamp, make sure that the nose of the bulb engages in the notch
on the socket.
fig. 35 Replacing the front direction indicator
c) Rear direction indicator
Steps:
Loosen the two screws and remove the protective glass.
Remove the bulb from the holder to the front and replace it.
Properly reassemble all components upon termination of the work.
d) Rear light
Steps:
Loosen the two screws and remove the protective glass.
Pull the bulb downward out of the holder and replace it.
Properly reassemble all components upon termination of the work.
INfORMATION
When installing the lamp, make sure that the nose of the bulb engages in the notch
on the socket.
INfORMATION
When reinserting the protective glass, make sure it sits correctly in the housing. Snugly
tighten the screws on the protective glass to prevent moisture from entering the lamps.
1.
2.
3.
1.
2.
1.
2.
