Tools:
Allen wrench, size mm
Ring wrench or open-end wrench, size 13 mm
Steps:
Loosen the lower screw connections of the anterior seat brackets.
Push the seat unit up or down to the desired seat inclination.
Retighten the screw connections of the seat brackets.
Properly reassemble all components upon termination of the work.
fig. 42 Setting the seat inclination
6.10.7 Standard Seat: Replacing/Setting the Side Panel Attachment Devices
The attachment is located on both sides on the posterior crossbrace beneath the seat.
Tools:
Allen wrench, size 3 mm
Steps:
Loosen the two set screws.
Remove the side panel attachment device and replace or readjust it as necessary.
Properly reassemble all components upon termination of the work.
❒
❒
1.
2.
3.
❒
1.
2.
