Otto Bock 757B35-1, Instructions For Use Manual

Page: 19 / 124

Ottobock | 19
7 Handling
7.1 Charging the battery
1) Connect the charging plug to the charging receptacle of the product.
→
The correct connection of the battery charger to the product is indicated by feedback
(Status signals).
→ The prosthesis system is switched off automatically.
→ The charging process starts.
2) Disconnect the product after the charging process is complete.
7.2 Display of the current charge level
The battery charge level can be queried at any time.
1) With the prosthetic system switched on, press the charging receptacle button (Taste
betätigen) and hold for less than one second.
2) The LED display on the charging receptacle provides information on the current battery
charge level (Status signals).
7.3 Safety shutoff
The purpose of the safety shutoff is to protect the battery; it is triggered in case of:
•
Excessively high or low temperature during the charging process
• Short circuit
• Overvoltage or undervoltage
INFORMATION
After a safety shutdown, the battery charger must be connected to reactivate the electronics.
8 Cleaning and Care
NOTICE
Improper care of the housing
Damage to the casing through the use of acetone, white spirit or similar solvents.
► Only clean the housing with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
9 Disposal
In some jurisdictions it is not permissible to dispose of these products with unsorted
household waste. Disposal that is not in accordance with the regulations of your country
may have a detrimental impact on health and the environment. Please observe the
instructions of your national authority pertaining to return and collection.
10 Legal information
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.