Cleaning a belt system with plastic closure
•
Depending on the model, belts/straps with plastic buckles can be washed in the washing machine between
40 °C
and
60 °C
.
•
Recommendation:
Use a laundry bag or net and mild detergent.
•
Alternatively, the belt straps can be cleaned by gently dabbing them with warm soapy water (with some disin
fectant) or carefully wiped with a dry, clean, absorbent cloth.
Additional cleaning instructions
•
Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
•
Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).
•
Do not iron or bleach the belts.
9.15.2 Disinfection
1) Thoroughly clean the pads and handles before disinfecting.
2) Wipe all parts of the wheelchair with a disinfectant.
Important information about disinfecting
•
If the product is used by more than one person, using a conventional disinfectant is required.
•
Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
10 Maintenance and repair
10.1 Maintenance
WARNING
Insufficient maintenance
Severe user injuries, damage to the product due to failure to observe maintenance intervals
►
Only carry out the maintenance tasks described in this section. All other maintenance and service tasks may
only be carried out by qualified personnel.
►
The functionality and operating safety of the product must be verified and a service performed at least
once per year
.
►
For users with a changing anatomy (for example body dimensions, weight) or users with a changing clinical
picture, have the product inspected, adjusted and serviced at least
once every six months
.
•
The function of the product should be checked
before each use
.
•
The product should not be used if defects are noted. This applies in particular in case of altered driving charac
teristics as well as problems with the user's seating position or the stability of the seat. Inform the qualified per
sonnel promptly for the rectification of defects.
•
This also applies if loose, worn, bent or damaged components, cracks in the frame or broken frame compon
ents are identified.
•
Some maintenance tasks can be carried out to a certain extent by the user at home (see the sections "Mainten
ance intervals" and "Maintenance tasks").
•
Failure to maintain the product can lead to injuries for the user of the product.
10.1.1 Maintenance intervals
The functions described below must be checked by the user or an attendant at the specified intervals:
When
Inspection task
Comments
Check all components with screw
connections for firm fit
Check the following in particular:
Attachment of the seat belt and back strap,
attachment of the foot plate; function of the
quick-release axles.
Before each use
Check the tyre pressure
High-pressure tyres:
8.0 bar (116 psi)
Indoor sport tyres:
11.0 bar (160 psi)
16.0 bar (232 psi)
Use a pressure gauge.
If none is available: use the “thumb pres
sure method”.
Before each use
Check the tyre tread
Perform a visual inspection.
31
Invader 480S26=20000_K
Maintenance and repair
Summary of Contents for 480S26 20000 K
Page 1: ...Instructions for use 3 Invader 480S26 20000_K...
Page 2: ...2 Invader 480S26 20000_K...
Page 37: ...37 Invader 480S26 20000_K...
Page 38: ...Invader 480S26 20000_K 38...
