Otto Bock 3B5-X2, Instructions For Use Manual

Page: 101 / 108

101
LED on
power
supply Status
LED on
battery
charger Error Resolution
Non-functional socket Check socket with another electric
appliance.
Defective power supply The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
No connection between battery
charger and power supply Check whether the charging cable
plug is fully engaged on the battery
charger.
Defective battery charger The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
Status
LED Charging status
indicator (5 LEDs) Error Resolution
The LED
ring is lit
in weak
purple No LED is lit Distance between bat­
tery charger and
receiver of the char­
ging unit on the pros­
thesis too great. If the
distance is more than
2 mm, the prosthesis
cannot be charged. Reduce distance
between battery char­
ger and receiver of the
charging unit.
LED 2 and 4 are lit up Charger excess tem­
perature
LED 1, 3 and 5 are lit
up Excessively high or
low temperature of the
prosthesis
Check whether the
specified ambient con­
ditions for charging the
battery are met (see
Page 95). The LED
ring is lit
up yellow
LED 3 is lit up The prosthesis is not
being charged
Distance between bat­
tery charger and
receiver of the char­
ging unit too great. Connection may be
improved by reducing
the distance between
the charger and receiv­
er of the charging unit.
The LED
ring is lit
up green The battery charger is
functional but not con­
nected to the receiver,
or the distance
between the battery
charger and receiver
of the charging unit is
too great. Connect the battery
charger or reduce the
distance between the
charger and the receiv­
er of the charging unit
on the prosthesis.