8
- Connecting the unit to any other power source may cause damage to the unit. Unwind the mains
cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully
inserted into the mains socket.
- The mains plug/appliance coupler is used as the disconnect device, the disconnect device must
remain readily operable.
• Connect the power to the AC~
socket on the unit and a wall outlet.
NOTE:
- Ensure all connections are connected before connecting to the mains power socket.
- Be sure to unplug the power cord from the outlet when the system is not in use for an extended
period of time.
General Operation
Standby/ON
When you first connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press the
/
SOURCE
button on the unit or the
button on the remote control to switch the unit
ON. "
HELLO
" will show on the display panel.
• Press and hold the
/
SOURCE
button on the unit or press the
button on the remote control again
to switch the unit back to STANDBY mode.
- Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
Note:
- If there is no signal under the AUX, HDMI, TV ARC and BLUETOOTH mode, the unit will automatically
switch off within 15 minutes.
Mode Selection
Press the /
SOURCE
button repeatedly on the unit or the
SOURCE
button on the remote control to
switch between
BT(Bluetooth), AUX, HDMI, TV ARC
modes. The selected mode will be shown in the
display.
Adjust the Volume
- Press the
VOL +/–
button to adjust the volume.
- If you wish to turn the sound off, press the
MUTE
button on the remote control, then "
MUTING
"
will show on the display panel. Press the
MUTE
button again or press the
VOL+/-
button to resume
normal listening.
Select a Preset Sound Effect
During play, press the
EQ
button on the remote control repeatedly to select:
MOVIE, MUSIC, TV, FLAT
.
