background image

2

Important Safety Instructions

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert 

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 

that may be of sufficient magnitude as to constitute a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the literature 

accompanying the appliance. 

Safety

Read these instructions

 – All the safety and 

operating instructions should be read before this 

product is operated. 

Keep these instructions

 – The safety and 

operating instructions should be retained for 

future reference. 

Heed all warnings

 – All warnings on the appliance and in the operating instructions should be 

adhered to. 

Follow all instructions

 – All operating and use instructions should be followed. 

Do not use this apparatus near water

 – The appliance should not be used near water or moisture 

– for example, in a wet basement or near a swimming pool or similar environment.

6  Clean only with a dry cloth.
7  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8  Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including 

amplifiers) that produce heat. 

9  Protect the power cord from being walked on or pinched, particularly at plugs, power boards, and at 

the point where they exit from the sound bar.

10  Only use attachments/accessories specified by the manufacturer.
11  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, 

or sold with the apparatus. When a cart or rack is used, use caution when moving the 

cart/apparatus combination to avoid injury from tip-over.

12  Unplug the apparatus during lightning storms or when unused for long periods of 

time.

13  Refer all servicing to qualified personnel. Servicing is required when the apparatus has been 

damaged in any way, such as a damaged power cord or plug, liquid has been spilled or objects have 

fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has 

been dropped.

14 

 This equipment is a Class II or double in sulated electrical appliance. It has been designed in 

such a way that it does not require a safety connection to electrical earth.

Caution:

-  Use of controls or adjustments or performance of procedures other than those described herein, 

may result in hazardous radiation exposure or other unsafe operation.

-   To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The 

apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such as vases, 

must not be placed on apparatus.

-  The mains plug/appliance coupler is used as the disconnect device, the disconnect device must 

remain readily operable. 

-   Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

Summary of Contents for SoundBase II















Reviews: