otometrics AccuScreen ABR User Manual Download Page 74

Page: 74 / 110

Otometrics

AccuScreen settings

Time and Date setting

9.2

Time and Date setting

1. Press the

Time and Date

button on the

Set-

tings

screen.

You can set the date in the upper part of the
screen and the time in the lower part.

Note ·

If you leave the

Time and Date

screen by

pressing the

button, the setting of seconds is set to

zero.

2. Press the arrows to select the day (DD),

month (MM), year (YYYY), hours (HH) and
minutes (MIN).

3. Press the

Tool

button to change the date and

time formats.

–

Date

Select from the list how the date setting is
to be shown on the screen.

–

Time

Select from the list how the time setting is
to be shown on the screen.

Summary of Contents for AccuScreen ABR















































































































Search results

Summary of Contents for AccuScreen ABR

Reviews:

Related manuals for AccuScreen ABR

Brands by name

Popular brands

otometrics AccuScreen ABR, User Manual

Search results

Summary of Contents for AccuScreen ABR

Reviews:

Related manuals for AccuScreen ABR

Brands by name

Popular brands