otometrics AccuScreen ABR, User Manual, Page: 19 / 110

Otometrics
19
Unpacking and Installation
Powering
2.5.3 Battery status
• The battery symbol is shown in the top right corner of the display, enabling you
to view the status of the battery at all times.
• When less than 25% of the battery capacity remains, we recommend that you
change the battery and recharge it as soon as possible.
• When the battery level drops below 10%, test results can be viewed, but testing
is no longer possible.
If the necessary minimum voltage should drop, AccuScreen switches off auto-
matically. Recharge or change the battery as soon as possible.
2.5.4 Powering the docking station
The AccuScreen docking station is powered through an adapter from the mains out-
let.
Warning ·
In order to comply with the safety requirements for a medical device system,
connection to the docking station must always be done outside the patient area (min.
1.5 meters/5 ft from the patient).
You will find an adapter plug kit when you unpack AccuScreen. The adapter plug kit
contains a range of adapter plugs you can choose from to fit your mains outlet.
Connecting to the mains supply
1. Select the adapter plug appropriate to your mains outlet and fit it on the adapter.
2. Connect the adapter to the docking station and the mains supply, and switch on
the mains supply. The
POWER
indicator will light up green.
Disconnecting from the mains supply
To disconnect AccuScreen docking station from the mains supply, simply remove the
adapter plug from the mains outlet.
Symbol Remaining battery capacity
100 - 75% Battery is fully charged.
75 - 50%
50 - 25%
25 - 10% Battery should be charged.
10 - 0% Battery is very low and testing is not possible.