otometrics ABR Screener User Manual Download Page 59

Page: 59 / 108

Quick Test

With

Quick Test

you can perform a quick test in all test functions without having to assign the test to a specific patient. It

is useful for demonstration or test of AccuScreen.

Note

•

These test results are not stored. As a consequence, the data from these tests is not available in the

Test View

and

Print

screens..

6.1

Performing a Quick Test

1. Do as described in

Preparing for testing

►

, but without adding a new patient or assigning the test to a specific

patient.

2. Press the

Quick Test

button on the

Home

screen.

From the

Quick Test

screen you can access the test types available in AccuScreen.

3. Press the

Start

button that is next to the test you wish to perform and that cor-

responds to the ear you have selected to test.

For descriptions of the individual tests, see:

–

–

–

–

Note

•

These test results are not stored and cannot be printed.

Otometrics - MADSEN AccuScreen

6 Quick Test

Summary of Contents for ABR Screener













































































































Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands

otometrics ABR Screener, User Manual

Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands