OCT/SLO SERVICE MANUAL Version V.4
25
Protocol for Alignment of Observation CCD Camera
Tools required: Crosshead screwdriver, camera alignment JIG.
The upper cover should be removed, all 3 parts.
1.
Attach Camera alignment JIG to lens barrel.
2.
Move external chinrest illuminator to 'backlight' the opaque target on the JIG
assembly.
3.
Check camera image is beingdisplayed correctly on the PC monitor (check all
connections).
4.
Adjust the tip/tilt assembler and the focus of the camera lens. Ensuring the iris of
the camera lens is fully open, adjust to centre a sharp crosshair in the camera
image.
