background image

 

29

Appendix B:  

REGULATORY COMPLIANCE 

 

FCC Part 15 Declaration of Conformity (DoC) 

The following equipment: 
Product Name: WiJET Wireless Projector/Monitor Adapter 
Model Number: WiJET is herewith confirmed to comply with the requirements of FCC 
Part 15 rules. The operation is subject to the following 
two conditions: 
1.   This device may not cause harmful interference, and 
2.  This device must accept any interference received, including interference that may 

cause undesired operation. 

FCC ID: MKZWJTL02682 

 

FCC Rules and Regulations - Part 15 
Warning: 

This device has been tested and found to comply with the limits for a Class B 

digital device pursuant to Part 15 of the Federal Communications Commissions Rules 
and Regulations. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to 
radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try and 
correct the interference by one or more of the following measures: 

.  

Relocate your WLAN equipped laptop computer. 

Increase the separation between the WLAN equipped laptop computer and other 

electronics. 

.  

Connect the WLAN equipped laptop computer into an outlet on a circuit different from 
that of other electronics. 

.  

Consult the dealer or an experienced radio/TV technician for help. 

 
FCC Radiation Exposure Statement 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment.  This equipment should be installed and operated with minimum distance of 
20cm between the radiator & your body. 
 

Caution: 

Changes or modifications not expressly approved by OTC Wireless 

could void the user’s authority to operate the equipment. 

 
This transmitter must not be co-located or operating in conjunction with any 
other antenna or transmitter. 

 
 

Summary of Contents for WiJET































Reviews: