Operating instructions EU 80
ÖSTLING Markiersysteme
5
3.3
Stencils
In order to make your own stencils quickly and professionally, ask about our
customized stencil printing systems. This includes the Östling PT 220, 550, and a
24 pin printer as well as all software.
4.0
Marking process
•
Turn on the machine (Pos. 6).
•
Set your desired voltage (Pos. 1 - Pos. 3) the voltage you choose will be lit.
•
Place the product to be marked on a base plate or other device. Place the Stencil
on the product. After that push the prepared marking head lightly on the product.
The marking time normally takes 1 - 1,5 seconds for black marking.
Hint:
After marking it is a good idea to rinse the marking head and stencil with clean
water.
Attention:
If you notice the etching quality begin to slip, re-check the felt and the
conductive net. Under normal use the felt will begin to collect carbon. For this
reason replace the felt as needed.
5.0
Maintainence
Regular maintainence of th marking machine is not necessary. If you do experience
difficulty, however, please turn to our service department. Unauthorized opening of
the machine will void the warranty.
6.0
Accessories
In order to make a more efficient operation we offer a marking station for the hand
operated unit. This consists of a base plate with T - nuts, two jiggings for attaching
your product, and an X-Y-Z stencil holder.
With this hand marking station, the product is laid on the affixed jiggings and the
stencil is affixed properly with the X-Y-Z stencil holder.
For further technical help you may turn to our technicians in order that they may
answer your specific questions about different marking heads and other accessories
such as customized construction or integrating the unit into your assembly line.
Summary of Contents for EU 80
Page 9: ...ÖSTLING Markiersysteme ...
