Oster BLSTTDG-NBG, Instruction Manual, Page: 29 / 56

English-10
BLEND-N-GO
®
CUP ACCESSORY (WITH SELECT MODELS)
1. Cup Lid
2. Break Resistant, BPA-Free Tritan™ Plastic
Cup
3. Locking Sealing Ring
4.
6-Point Blade
WARNING: The blade is very sharp,
handle carefully.
5. Threaded Cup Bottom
6. Motor Base
USING YOUR BLEND-N-GO
®
CUP
ACCESSORY WITH YOUR BLENDER
WITH ACTIVESENSE™ TECHNOLOGY
Before you use the product for the first time,
separate all parts and clean them. Refer to Page
16 for cleaning instructions - the cup, lid and blade
assembly are all top rack dishwasher safe.
Never blend hot liquids in the Blend-N-Go
®
cup accessory.
1. Place the blade in the threaded cup bottom.
2. Place the sealing ring over the blade
assembly. Carefully press and tuck the sealing
ring into the last groove of the threaded
cup bottom. Refer to page 7 for detailed
instructions on blade assembly.
3. Place all ingredients into the cup, then screw
the integrated blade assembly clockwise
onto the cup. Be sure the integrated blade
assembly is tightened to the cup before using.
4. To put the cup assembly on the motor base, push down and turn counter-clockwise.
The cup assembly should be fully seated into the 4 grooves of the motor base.
5. Refer to page 7-8 on how to use the food mode settings and manual controls. Press
the start/pause button ( ) to begin blending.
NOTE: The food mode “Salsa” ( ) is not available with the Blend-N-Go
®
cup
accessory.
6. Press the start/pause button ( ) to stop blending and the power button
( )
to turn the blender off. Remove the cup assembly from the motor base by
pushing down and turning clockwise. This appliance is pre-programmed to turn off
1
PRESS
TO START
MANUAL
BLEND-N-GO
MEDIUM
SPEED
2
3
4
5
PRESS
TO START
MANUAL
BLEND-N-GO
MEDIUM
SPEED
OPRIMA
PARA EMPEZAR
MANUAL
VASO BLEND-N-GO
MEDIA
VELOCIDAD
PRESSIONE
PARA COMEÇAR
MANUAL
JARRA BLEND N' GO
MÉDIA
VELOCIDADE
6
BLSTTDT Series_BLSTTDG Series_18SEPM1.indd 10 1/17/19 08:52