Commercial Clipper
When using an electrical appliance,
basic precautions should always be
followed, including the following:
Read all Instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
1. Do not reach for an appliance
that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in
a shower.
3. Do not place or store appliance
where it can fall or be pulled into
a tub or sink.
4. Do not place in or drop into water
or other liquid.
5. Always unplug this appliance
from the electrical outlet
immediately after using.
6. Unplug this appliance before
cleaning, putting on or
taking off parts.
WARNING
To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. An appliance should never be left
unattended when it is plugged in.
2. Close supervision is necessary
when this appliance is used by,
on, or near children or invalids.
3.
Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by the
manufacturer.
4. Never operate this appliance if
it has a damaged cord or plug, if
it is not working properly, if it has
been dropped or damaged, or
dropped into water. Return the
appliance to a service center for
examination and repair.
5.
Keep cord away from heated
surfaces.
6. Never operate the appliance when
air openings are blocked or while
on a soft surface (such as a bed
or couch).
7.
Never drop or insert any object
into opening.
8. Do not use outdoors or operate
where aerosol spray products are
being used or where oxygen is
being administered.
9. Do not use this appliance with a
damaged or broken comb or
blade, as cut or scratched skin
may occur.
10. To disconnect, move all controls
to “OFF”, then remove plug from
outlet.
11. Do not wrap cord around unit
when storing. Continuous stress
on the cord can damage cord
insulation and result in a
shock hazard.
12. Avoid contact with moving blades.
13. Avoid tangling or kinking the cord
while clipping. Should the cord
SAVE THESE INSTRUCTIONS
OPERATE ON VOLTAGE SPECIFIED ON CLIPPER
DO NOT USE THIS CLIPPER UNTIL YOU HAVE READ THESE OPERATING INSTRUCTIONS
OPERATING THE UNIT
Always apply one to two drops of the provided blade lubricant
or other Oster approved lubricant to the blades before use.
Cutting efficiency may drop and the blades and motor may be
damaged if hair is dirty or hair styling agents have been applied.
Always ensure that hair is clean before using the clipper.
1. Turn the clipper on using the “on-Off” switch located
on the top of the unit and use the clipper.
2. Turn the clipper off when finished using.
3. Cover the blades with the provided blade guard to protect the blades.
4. Unplug unit after use and store properly.
User-Maintenance Instructions
1. The appliance has no user serviceable parts.
2. The product is for commercial use.
become tangled or kinked, stop
clipping and straighten the cord.
14. This appliance is for clipping
purpose use only.
15. Keep the appliance dry.
16. The intended continuous
operating time is 20 minutes.
17. During use, do not place
or leave the appliance
where it is expected to:
1) subject to damage by animal, or
2) exposed to weather.
18. This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the appliance
by a person responsible for their
safety. Children should be
supervised to ensure that they do
not play with the appliance.
