D E S C R I P T I O N
TKV/TKH are roof fans with backward curved impel-
ler and swing-out design.
The fans are equipped with ErP approved external
rotor induction AC or EC-motor with maintenan-
ce-free sealed ball-bearings
.
They are manufactured from galvanized steel sheet
which can be polyester plastic coated or with coating
that complies with the Environmental class M3/Cor-
rosion class C4.
A P P L I C A T I O N
E N G L I S H
You have choosen a quality product from H. Östberg AB.
For the best operation we ask you to follow this
directions for use exactly and save for future use.
This directions for use contains following products:
TKV/TKH 560, TKV/TKH 660, TKV/TKH 760 och TKV/TKH 960.
Scan the QR code on the product label or visit www.ostberg.com
for further information about the product.
10
• TKV/TKH are accessible for the user, according to
IEC 60335-2-40, to by themselves do the service
and maintenance, according to this Directions for
use. But before this work the unit must be current-
less. With reservation according to IEC 60335-2-
7.12 ”This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given super-
vision or instruction concerning use of the applian-
ce by a person responsible for their safety.”
”Children should be supervised to ensure that they
do not play with the appliance.”
• The fan is used for transportation of “clean” air, mea-
ning not intended for fire-dangerous substances,
explosives, grinding dust, soot, etc.
• To achieve maximum life time for installations in
damp or cold environments, the roof fan should be
operating
continuously.
• The fan may not be operated at lower ambient tem-
perature than -30°C.
• The fan should be mounted horizontal.
• All fans are as standard either single phase 230 V, 50
Hz or 3-phase x 400 V, 50 Hz.
• The fan is intended to be used with the voltage and
frequency that’s stated on the label on the fan.
H O W T O H A N D L E
• The fan must be transported in its packing until
installation. This prevents transport damages,
scratches and the fan from getting dirty.
• TKV/TKH (except TKV/TKH 560 A1) have hand-
les on each side.
TKH
TKV
TKV/TKH 560 A1
1270366_utg5_TKV_TKH_SV_EN.indd 10
2020-01-07 11:06:14
1270366_utg5_TKV_TKH_SV_EN.pdf 10
1270366_utg5_TKV_TKH_SV_EN.pdf 10
2020-01-07 11:11:04
2020-01-07 11:11:04
