31
Information of the units current status such as temperature and fan speed is shown in the
VIEW MODE 1
and
2
.
These menus is normally not lit up for battery-saving purposes but is lit up after the first press of the button and
is switched off after about 2 minutes of not being in use.
The control unit automatically returns to
VIEW MODE 1
after one minute when one has viewed other submenus.
NB! At new setting a delay of 15 seconds should be taken into consideration.
SYMBOLS THAT CAN BE DISPLAYED IN VIEW MODE 1:
SYMBOLS THAT CAN BE DISPLAYED IN VIEW MODE 2:
VIEW MODE 1:
In order to change view mode press or .
To activate or disable the keylock;
press down the key for 3 seconds.
Bottom row
shows the possible
choices with key.
Top row and
middle field
displays current
values and activities.
Status light
Green = Unit is running
Red flashing = Alarm
Light off = Unit is off
UP
DOWN
ENTER
BACK
UP
DOWN
ENTER
BACK
VIEW MODE 2:
View mode 2 shows data of sensors.
UP
UP
DOWN
DOWN
= Function of keys up and down for view mode 2.
= Alarm
= Symbol indicates that the heating coil is on.
= Symbol indicates that the cooling coil is on.
= Indicates that the Week timer is active.
= Outside temperature.
= Supply air temperature.
= Room temperature. Sensor placed in room.
= CO2 compensation is active.
= Alarm
= Indicates Boost is active.
= Indicates Away is active.
= RH compensation is active.
= Relative air humidity in per cent.
= Carbon dioxide level in PPM
(part per million).
CO2
OPERATING THE CONTROL UNIT
1270431_utg1_SAU_EC_sv_en.indd 31
2019-01-11 12:53:12
