Össur PROPRIO FOOT W, Instructions For Use Manual

Page: 4 / 82

4
ENGLISH
The Unity ® System is referred to as the device in the following document. This document provides important
information on the indications for use, and handling of the device. It is intended for a certified prosthetist and the
user of the device. The device may only be fitted by a qualified practitioner authorized by Össur after completing
the corresponding training.
UNITY ® SYSTEM COMPONENTS (FIGURE 2)
1. Membrane bolt
2. Mounting piece
3. Anchor blade
4. Bumper
5. Spring blade
6. Membrane
7. Membrane housing
8. Bumper bolt
9. Duckbill
10. Inlet port - tube fitting
11. O-ring
12. Inlet port - port fitting
13. Attachment piece
14. Attachment bolt
15. Tube
16. Outlet port
PROPRIO FOOT ®
Refer to the PROPRIO FOOT ® Information For Use.
DEVICE DESCRIPTION
The device is a prosthetic interface with suspension properties designed to provide elevated vacuum for socket
suspension. Expected attainable vacuum achieved during normal operation ranges from 15–18 inHg or higher.
Assisted suspension is obtained through a pump which draws air out from the socket in each step creating an
elevated vacuum inside the socket interface.
The device is designed to function in any temperature and humidity that the user encounters during normal use.
INDICATIONS FOR USE
Major lower limb amputations.
CONTRAINDICATIONS
None known.
INTENDED USE
The device is a non-invasive, reusable prosthetic device, designed for single patient use.
The device should only be used with a prescription from a physician that includes the necessary treatment
information.
N.B. The device is designed to be used with Iceross Seal-In
®
liners, other applications are the sole responsibility of
the provider.
SAFETY
Warning
The device is weatherproof, therefore cannot be submerged in water (see Weatherproof section).