Ossur PROPRIO FOOT, Technical Manual

Page: 11 / 24

11 10
When the proprio foot
®
battery charge is low and the warning pulses for power loss are delivered, the
foot will return to the latest preset heel height position.
the foot should not be used when the power is off.
FINISHING
• When covering the foot, take care not to restrict the motion of the system.
• It is recommended not to use any foam covering except the foot cover supplied.
BASIC OPERATION
POWER ON
• To turn on the proprio foot, hold both buttons
at least one second.
»
The system confirms with two beeps and vibrations.
»
The LED blinks green and yellow
note:
The keypad will be
disabled
after
60 seconds
from use.
To enable the keypad hold both buttons at least for
one second.
When proprio foot
®
is activated for the first time, the
default manufacturer settings will be enabled.
In the default manufacturer settings, the stair response is
set to 4 degrees dorsiflexion, sound is ON and the RELAX
MODE is OFF.
(Figure I-O)
POWER OFF
• To enable the keypad, hold (both buttons) for at
least one second.
• To power OFF hold and press (both buttons) for
at least one second.
note: Pay attention to the button audible feedback.
The system confirms with three beeps and three
vibrations. The LEDs turn off.
note: The keypad will be disabled after 60 seconds from use.
To enable the keypad hold both buttons at least for
one second.
Hold
hold
hold
2×
2×
hold
hold
3×
3×