OSS OSS-PCIE-4UV-5-1, User Manual

Page: 37 / 90

One Stop Systems
OSS-PCIe4-4UV-5 37
6 Verify HIB Device
6.1 Linux OS
In Linux, you can check if the HIB card is detected by using the following commands on the terminal window.
NOTE: Make sure you are logged-in as “super user” when running the lspci command.

#lspci –tv | grep c010
The c010 is the Device number of the card.
The output below gives you a tree-like structure of the PCI Device B/D/F numbers of b8:00.0 and bd:00.00 (B=Bus number. D=Device number.
F=Function number).
The /B/D/F numbers will vary from system to system .
You can use the SDevice (Sub Device) of the card 00b2.

#lspci –m | grep ‘Device 00b2’
The output below gives you B/D/F numbers, the device Class, the Vendor name and Sub Vendor name.
To check on the revision of the card , use the command below.

#lspci –vmms ac:00.0

See output below.
To check on the PCIe Gen speed and Link Width

#lspci –nvvs b8:00.00 | grep ‘LnkCap\|LnkSta’