OSS OSS-PCIE-4UV-5-1, User Manual

Page: 20 / 90

One Stop Systems
OSS-PCIe4-4UV-5 20
2.4 Install Target Card
By default the “Target card (OSS-PCIe-HIB616-x16)”is installed in the target slot / upstream slot of the expansion system.

Check the switches on the Target card, make sure it is configured to Target mode.See photo below for the Target mode switch
settings.
2.5 Install Host Card
Before installation, you must check the switches on the Host card. By default, all the switches on the Host card are set to OFF position (“Auto-
Negotiation” mode). You can leave the switches to default or manually set the switches (SW1 and SW2) on the card for the desired Host
operating mode. See “Host Card Configuration” section for more details. See photos below for host mode switch settings.
2.5.1 Host Card Configuration
By default, the Host adapter card is set to “Auto-Negotiation” mode. All switches are set to OFF position. The following are manual switch
settings on the Host card.
x16 Dip switch Settings:

SW1 #2 = ON; #5 =ON.

SW2 #1 = ON; #2 = ON