One Stop Systems
OSS-CPCIe3-3U-10GbE-x4-QUAD 5
4
Module Installation
1.
Turn the chassis off and unplug the chassis from AC power.
2.
Before inserting the module, inspect the chassis slot to ensure there aren’t any bent pins in the slot connectors.
3.
Set the injector /ejector handle in down position.
Caution:
To avoid damaging the module, do not touch exposed board end connectors or components on the printed circuit board when
installing the module.
4.
Slowly insert the module in the chassis slot by placing the module card edges into the top and bottom card guides.
With the injector/ejector handle in the down position, carefully slide the module to the rear of the chassis.
Caution:
Ensure that the module is aligned perpendicularly to the chassis as you begin sliding it in. Otherwise, it’s possible for components
on the module (or on adjacent modules) to be damaged by contact between modules.
