OSS EB3450 User Manual Download Page 43

Page: 43 / 92

One Stop Systems

EB3450 | 43

Below is the output text of

“lspci-vv”.

Showing all OSS card slot devices with two GPU cards installed. OSS devices are highlighted in

red

. Two

GPUs plugged in are highlighted in

green

(pages 47-48).

01:00.0 PCI bridge: PLX Technology, Inc. Device 8796

(rev a) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Memory at f7100000 (32-bit, non-prefetchable) [size=256K]

Bus: primary=01, secondary=02, subordinate=07, sec-latency=0

I/O behind bridge: 0000e000-0000efff

Memory behind bridge: f6000000-f70fffff

Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff

Capabilities: [40] Power Management version 3

Capabilities: [48] MSI: Count=1/8 M 64bit+

Capabilities: [68] Express Upstream Port, MSI 00

Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8796

Capabilities: [100] Device Serial Number aa-87-00-10-b5-df-0e-00

Capabilities: [fb4] Advanced Error Reporting

Capabilities: [138] Power Budgeting <?>

Capabilities: [10c] #19

Capabilities: [148] Virtual Channel

Capabilities: [e00] #12

Capabilities: [b00] Latency Tolerance Reporting

Capabilities: [b70] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>

Kernel driver in use: PCIeport

Kernel modules: shpchp

02:04.0 PCI bridge: PLX Technology, Inc. Device 8796

(rev aa) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=02, secondary=03, subordinate=03, sec-latency=0

Capabilities: [40] Power Management version 3

Capabilities: [48] MSI: Count=1/8 M 64bit+

Capabilities: [68] Express Downstream Port (Slot+), MSI 00

Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8796

Capabilities: [100] Device Serial Number aa-87-00-10-b5-df-0e-00

Capabilities: [fb4] Advanced Error Reporting

Capabilities: [138] Power Budgeting <?>

Capabilities: [10c] #19

Capabilities: [148] Virtual Channel

Capabilities: [e00] #12

Capabilities: [f24] Access Control Services

Capabilities: [b70] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>

Kernel driver in use: PCIeport

Kernel modules: shpchp

02:08.0 PCI bridge: PLX Technology, Inc. Device 8796

(rev aa) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=02, secondary=04, subordinate=04, sec-latency=0

Capabilities: [40] Power Management version 3

Capabilities: [48] MSI: Count=1/8 M 64bit+

Capabilities: [68] Express Downstream Port (Slot+), MSI 00

Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8796

Capabilities: [100] Device Serial Number aa-87-00-10-b5-df-0e-00

Capabilities: [fb4] Advanced Error Reporting

Capabilities: [138] Power Budgeting <?>

Capabilities: [10c] #19

Capabilities: [148] Virtual Channel

Capabilities: [e00] #12

Capabilities: [f24] Access Control Services

Capabilities: [b70] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>

Kernel driver in use: PCIeport

Kernel modules: shpchp

02:0c.0 PCI bridge: PLX Technology, Inc. Device 8796

(rev a) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=02, secondary=05, subordinate=05, sec-latency=0

Capabilities: [40] Power Management version 3

Capabilities: [48] MSI: Count=1/8 M 64bit+

Capabilities: [68] Express Downstream Port (Slot+), MSI 00

Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8796

Capabilities: [100] Device Serial Number aa-87-00-10-b5-df-0e-00

Summary of Contents for EB3450





























































































Search results

Summary of Contents for EB3450

Reviews:

Related manuals for EB3450

Brands by name

Popular brands

OSS EB3450, User Manual

Search results

Summary of Contents for EB3450

Reviews:

Related manuals for EB3450

Brands by name

Popular brands